Last updated: January 10, 2021
What Can I Use For Chainsaw Bar Oil
If you are a professional or a newbie in cutting trees using a saw, you notice that it needs regular maintenance to enable it to yield high performance. One of the effective maintenance practices for chainsaws is lubrication. Applying chainsaw oil to its moving parts will cut down on the friction rates and improve its output. You may be wondering what the best bar oil is to use and end up asking yourself the question, ‘what can I use for chainsaw bar oil?’
Chain saws and bars usually use specific oils that need to be sticky because their parts experience a lot of friction. If the oil is moist enough, then it will not spatter off the chain because the components move at too high speeds. Therefore, there will be no damages to the parts of the chainsaw. However, there are times that you run out of the specific oil and need an alternative. This article outlines some of the available options.
Qualities of good Chainsaw bar oil
The first rule of chainsaw oil is that it needs to be adhesive enough not to fall off the chain as it spins at high speeds. In case it does so, it may lead to the occurrence of friction. And we know well that high friction can cause heat build-up, which destroys the saw in the long run.
Acceptable lubricants should be slippery to prevent friction, as well. The parts should not contact each other, which is where the tricky aspect comes in.
Any chainsaw oil that is friendly to the environment is the best to use. As the chainsaw is in operation, the oil may splatter on its background because of the parts in motion. Thus, oil that is harmful to the environment will cause a lot of damages after that.
Alternatives To Chainsaw Bar Oils
If you do not have the specific chainsaw oil that follows a manufacturer’s recommendation, you should settle for other available alternatives. Nevertheless, they are not usually appropriate for long term use as they may destroy the functioning of your saw.
Most chainsaw manuals indicate the type of chainsaw bar oil to use. Some of the most common include Oregon chainsaw bar oil, Poulan pro bar oil.
Vegetable oil is standard in our kitchens, thus readily available. Its texture is thinner, which makes its viscosity lower in comparison to the other oil types. Its main upside is that it is purely environmentally friendly and cannot harm the surrounding eco life. However, it diminishes quickly and needs you to refill regularly.
You can quickly get motor oil off your vehicle, but it is not the best thing to do. You instead go to a store and buy fresh motor oil for use on your chainsaw rather than getting used to oil. Used oil is highly abrasive and may burn up your chain saw.
This oil does not exhibit the stickiness aspect and may eventually lead to friction occurring. If the chain is at full speed, then the oil will toss out. The viscosity of oil may change depending on the temperature. Therefore, choose the fat that is suitable for each temperature change.
It would also help if you refilled it frequently, which eats into your budget a great deal. Motor oil is harmful to the environment, which means that the local habitat is not safe. All in all, it serves to make sure your chain saw receives good maintenance.
This type of oil is not any different from motor oil. The difference comes in the texture. Hydraulic oil is thinner than motor oil hence low viscosity. It dries out faster and tends to need refilling quite often.
You can place Canola oil in use in the place of vegetable oil. It resists heat quickly, which ensures that your chainsaw does not undergo friction. If you plan to go sawing outdoors in areas where there are low temperatures, this will be the best lubricant to use. It is highly susceptible to low temperatures.
How To Lubricate A Chainsaw
For as long as you have the right lubrication oil, the process itself is not challenging. Chainsaws come with a reservoir tank for filling the lubrication oil. If you notice, new chainsaws come with their lubrication. All you need to do is continuously refill once the oil goes out.
The first thing to do before adding oil to your chainsaw is to ensure that it is not in operation as it will cause you injuries. Thus, you first need to unplug it and place it on an even surface so that it does not topple over as you refill your oil.
There is a cap on top of the reservoir. Open it up and fill it with oil till it is enough. But do not serve more than the correct requirement. Finally, replace the reservoir’s lid and then wipe with some cloth they saw if the oil spills out during refilling.
Tips on using alternative oils for your chainsaw
- You should never use unfiltered motor oil from your car. This is because it contains harmful metallic substances that can destroy the chainsaw’s ability to function correctly.
- Because a chainsaw’s oil reservoir and fuel tank deplete simultaneously, they will also need refilling at equal times. As you add your alternative oil, it may run out quicker than the fuel because it is thinner. At no time should you leave your saw without lubrication. It is good to fill both simultaneously and then monitor how quickly the oil diminishes; then, you will know when it is right to add more.
- You should not add oil to the reservoir if the saw is operating. Also, cutting wood with a saw whose oil reservoir is empty is dangerous.
Using standard manufacturers’ chainsaw bar oil is what you need to do to keep your saw in check. As of now, you can answer this question ‘what can I use for chainsaw bar oil? As much as the alternative oils are not the best options, they serve the intended purpose. Just take care not to overuse them.