Although you can use an RJ45 crimper or other crimping tools for crimping the crimp bead, the professional-grade result can only be achieved with a crimping plier. Using a crimp plier, you can cure the crimp beads to feel sharpness or annoying edges when wearing a jewelry piece.
If you don’t know how to use crimping pliers, this guide will help you learn it. You may require a little practice to become familiar with the process, this will surely be a value-adding effort for your customers and you.
Step by Step Process – How to Use a Crimping Pliers
When the jaws of crimping pliers are in shut off state, you will find 2 oval holes. 1 hole has a slope on 1 side, and the other one is an original oval-shaped hole.
Step 01: Crimp Bead Threading
Thread the crimp bead onto the threading material. Too often, the crimp bead is a soft-flex or tiger-tail coated wire.
Step 02: Make a Loop of the Wire
Take the wire end and make a loop of it. Pass the loop through the crimp bead and leave a small end as a tail.
Step 03: Place the Crimp Bead into the Second Oval-shaped Hole
Use the plier’s dip to place the crimp bead into the second oval-shaped hole. Then around the bead, the pliers need to be closed.
Step 04: Crimp Bead Turning to its Side
Next, the crimp bead needs to be turned to its side. Then place it on the 1st smooth oval-shaped hole, and nearby the crimp bead, the pliers need to be closed. Make a round shape of it by compressing it. Here you will need to ensure the pliers oval shapes are directly positioned around the crimp.
Step 05: Cut the Excess Thread
After securing the crimp bead, there will be some excess thread. Use a trimmer to cut them off. Now a decent loop is created, which will help you to grip your clasp.
- The wire’s tail end should not disturb or injure the wearer. In order to ensure it, keep 1 or 2 on the jewelry, closer to the crimp bead, so that there is enough space to thread a bit of additional beading wire. A thread size of 4mm is more than enough space at this point.
- When practicing, you will need to be patient. Without much patience, you will not achieve the best result.
Frequently Asked Question
Question: Can you crimp ferrules with pliers?
Answer: Yes, you can do this. Crimping ferrules with pliers depend on the ferrules and cable’s thickness. The crimping process of ferrules using pliers is entirely effortless. Simply place the ferrule in the plier’s designated location. After setting the ferrule properly, apply pressure as much as you can. This way, the metal fastener will get crimped.
Question: Can I use pliers instead of crimpers?
Answer: Regular pliers can be used to crimp instead of a crimping tool. Even a screwdriver or nail can do the crimping task well. Simply grab the one end of the wire using the nail or screwdriver and crimp it in place. You are all done with the crimping process.
Crimping is an effortless process with the right tool. More importantly, you can crimp a wire using multiple items like RJ45 strippers, crimping pliers, screwdriver, nail or many other things. Also, the crimping process doesn’t take much time, and with less stress, you can create a long-lasting bond between 2 wires.
Hopefully, with the process of how to use crimping pliers, you will be able to crimp 2 wires efficiently.
Thanks for reading this guideline!