Embed This Product
Copy Code
how to mount a bench vise

How To Mount A Bench Vise? Just 6 STEPS !!!

Last updated: September 7, 2020

How To Mount A Bench Vise? Just 6 STEPS !!!

By Herbert Dorman

How To Mount A Bench Vise? Just 6 STEPS !!!

Mounting a bench vise is not a challenging task, but doing it properly is quite tricky. Also, a properly mounted bench vise will give you the best efficiency undoubtedly.

Placing a material like wood or steel needs to be securely fixed at one place sometimes. And at this point, a bench vise plays a crucial role.

You can place a stationary bench vise in the middle of a table. But a bench vise that has a swivel base, needs to be placed at the edge of a table if you want to get the best benefit from it.

To get an efficient performance from a bench vise, let’s have a look at the step by step process of ‘how to mount a bench vise.”

 

Process of Mounting a Bench Vise

However, we need a few tools and materials to continue the process smoothly.

Required tools

  • Pencil
  • Cordless Drill
  • Drill Bit
  • Socket
  • Wrenches 

Required materials

  • Bolts
  • Washers (top & underside)
  • Lock Washers
  • Nuts 

 

6 Step Guidelines

Step 01: Firstly, measure the mounting holes as well as mark it out. Accomplishing this task is so simple. Take a pencil, place the bench vise to your required place, use the pencil to mark the position of the mounting holes.

Be informed that a mounting template is available with some vises. In that case, you have to make a plan, including the template. Make sure the vise base and the template is matching each other correctly.

Step 02: Take a drill machine that has the ideal bit to create the mounting holes. While working on plywood, be sure you are not applying much pressure.

Step 03: Place a washer over the hole of the bench vise. At this point, you will find the washer a bit bigger. Take a bench grinder or a metal file to fit the edge better.

Step 04: Over the hole, the vise needs to be aligned. Then, with the washer, the bolt needs to be placed into every hole. If you face any sizing problem of the washer, use a modified washer without confusion.

Step 05: You need to position the washer and lock washer at the underneath hole of the bench vise. Give the nut a hand tightening. Follow the same process for every bolt.

Step 06: Now, you need to give a tighten all the bolts to the bottom. To do this, use a socket range to the bolts. And use a regular wrench to hold the nut. Undoubtedly, you are looking to give a heavy tight. But when you are operating with any kind of wood, be careful not to provide heavy tight. Make sure; the bolts are tightened evenly.

 

How To Mount A Bench Vise? – Here is a quick video tutorial

 

 

Where do we need to use bench vises?

Do you know the other name of a bench vise is wood-working or engineering vise? Either wood or metal is used to make a bench vise. The primary purpose of a bench vise is to hold an object securely.

Let’s give an intent look at the uses of a bench vise.

 

Wood-working

For the finishing touch up, carpentry works required glue. Except for the gravitational force, extra pressure is needed to keep the pieces together until they are dry. For this reason, using a bench vise will be the best choice in holding the wood-pieces together. Also, it makes the adhesive quick dry or sticking with the material. Except for carpentry work, if any other job site needs similar work, a bench vise is always ready to provide you a comfortable operation.

 

Metal Works

In the metal works, a bench vise is mostly required while the metal cutting operation is going on. If you want to perform a perfect cut at the top and bottom part of metal, the opposite end needs to be held tightly. In this type of operation, a bench vise aids the best.

 

Sawing

In carpentry work, you can’t avoid sawing. During an incision, you may need to cut a pile of wood congruently. To get a clean shave of the wood-pieces, the pile of the woods needs to hold appropriately. Otherwise, you will get an uneven cutting performance. You can nicely grip and neatly assemble the pile of wood-pieces by taking the assistance of a bench vise. You will be pleased with the final cut as the wood-pieces will perfectly fit to a piece of furniture for sure.

 

Drilling

Drilling is a standard operation that you will find in plumbing, carpentry, electrical fittings, and interior decors job site. Steadiness and care are inevitable in a drilling operation. A bench vise can hold the drill to an accurate position, and the drill can perform to create a hole proficiently. A bench vise spreads its hand to give you an impressive drilling experience. You can’t avoid using a bench vise in drilling types of applications.

 

Sanding

The sandpaper is used to give a finishing touch to many applications like painting or coating. Rubbing sandpaper on an uneven surface will provide you with a smooth finish undoubtedly, but the processing time is high. The sanding process will become fast and smooth if you have taken proper arrangements.

That is, related elements, such as a door or a grill, should be fixed appropriately in the workplace. In this regard, you have to use a bench vise. Also, your hands will remain safe as you are not using your hands to do the sanding.

A bench vise is always ready to give you an excellent sanding performance.

A perfect working environment can be provided, wherever needed, with the comfortable use of a bench vise.

 

Conclusions

So, you have all done following the steps on the process of mounting a bench vise. I believe, now you can work with a bench vise efficiently than before. Also, you got a few ideas regarding where you can use a bench vise. I hope this article will help you a lot in learning about a bench vise. 

Leave a Comment

Your email address will not be published. Required fields are marked *