How To Measure ATV Tires? (3 Steps Only)

How To Measure ATV Tires

Many people searched in google, typing, “how to measure ATV tires?” This is because measuring ATV tires is dissimilar to measuring other objects.

Using a measurement tape on the side of a steep tire, ATV/UTV tire height can’t be measured. Also, it is not measured when the tire is unmounted, nor is the tire propagated to the maximum operating PSI.

Then what is the procedure for measuring ATV tires?

This article will discuss everything about measuring an ATV tire.

So, read it intently, and don’t miss a single word.

What is ATV Tire?

The full form of ATV is an all-terrain vehicle. ATV tires are specially designed with ATV in mind. These tires are different in size and dimension than regular pickups or other vehicles’ tires. So, you can’t use ATV tires in your regular vehicles.

With the help of ATV tires, you can comfortably handle impenetrable timber, sharp turns, and muddy terrain with minimal trouble.

If you are an owner of an outdoor vehicle or thinking of purchasing a new one, an ATV tire will be a wise pick undoubtedly.

How do I know what size my ATV tires are?

Many ATV tire-selling manufacturers provide a dimensional number on the tire so that a customer can get a mental image of the tire size.

But the question is, how to read them?

Generally, manufacturers engrave a set of 3 numbers on the ATV tires, which are separated by either “X” or “– “or both marks.

Let’s look at the below example: It is a method of measuring a traditional tire size.

28*13-15

Here, the first number, 28, tells that when the tire is inflated, the overall height of the tire is 28 inches.

The second number, 13, refers to when the tire is properly mounted and has the correct air pressure in it; the overall width of the tire is 13 inches.

Finally, the last number shows the diameter of the wheel that will mount a certain tire.

However, be noted that the above example is an example of a traditional ATV tire size. And the units are in inches.

Now, let me share an example of a metric tire size.

Look at this number: 200/60 R 10

Identify the numbers next to your wheel.

The first number tells the width of the wheel when air pressure is full in it. At this point, the unit is in millimeters (mm). Divide the number by 25.4 if you want to measure it in inches units.

Following the traditional method, the tire width is 7.87”, and it will be the second number in traditional tire size.

Then, the next number, 60, refers to the height of the tire in mm when correctly inflated and mounted. If you will need to convert this number in inches, double it and divide by 25.4. At this point, the wheel’s height will be 4.72”, and the result will be the first number as per traditional tire size.

The letter “R” refers to the tire’s radial construction features. And the last digit tells the diameter of the tires.

Step by Step Procedure to Measure ATV tires Accurately 

Step 01:

Use maximum operating pressure to mount and inflate the wheel. Generally, 7 – 8 psi is the maximum operating pressure for all ATV tires. However, tires which are made for UTVs or side-by-side are large, and they require higher operating pressure along with loads.

Often tire height gets measured with maximum working pressure, and it can be 12 – 21 psi depending on the wheel. You will find the maximum operating pressure at the sidewall of the wheel.

Step 02:

The tires should not contain side-by-side or ATV weights. Either the tire must need to be removed from the machine, or you will need to use a jack engine to mount the machine. This way, the wheel will not touch the ground.

The weight of the machine completely exceeds the tire. Machine weight can vary dramatically. For utility, the ATVs can be lightweight (250/300), or they can be heavy 4-seater SXS. The amount of tires squat gets affected by the machine weight as well as the measurement of the tire also can adversely be changed.

Step 03:

Take a soft measuring tape and start measuring the circumference of the wheel at the center of the tread (maximum point).

To measure the tire height, you will need to divide the circumference by π (pi) – 3.14.

For instance, if the tire circumference is 80”, divide it by 3.14, and the result will be 25.4777”. The manufacturer will mark this measurement as 26”.

Frequently Asked Questions (FAQ)

ATV and UTV tires look the same? Do they have any similarities?

Although the outlook of ATV and UTV tires are the same, they have dissimilarities. They have numbers or letters on their tires and based on that, they are designed.

What is the lifespan of ATV tires?

The lifespan of an ATV tire is 4000 – 5000 miles. Also, ATV tire lifespan depends on a few factors, like tire rubber quality and hardness, the surface that you are riding on, the style of the tire, etc. If you ride your vehicle frequently, an ATV tire will last 1 – 2 years. And if you are infrequent, an ATV tire will give you 4 – 5 years of service.

Can I change the ATV tire at my home workshop?

It all depends on your skill in handling ATV tire-changing tools. If you are considerably skilled, you can change the ATV tire at your home workshop and save a few bucks.

Final Thought

For any terrain vehicle, ATV tires are the most crucial component. I believe this article removes all your questions related to “how to measure ATV tires.”

If you like this article and get benefitted from it, don’t forget to press the share button to share on different social media.