Embed This Product
Copy Code
How To Fix A Staple Gun Spring

How To Fix A Staple Gun Spring? 6 STEPS ONLY!

Last updated: September 7, 2020

How To Fix A Staple Gun Spring? 6 STEPS ONLY!

By Herbert Dorman

How To Fix A Staple Gun Spring? 6 STEPS ONLY!

A staple gun is a tool that permits you to staple several types of elements. This tool is a popular one due to its fastening characteristic onto paper, plastic, synthetic, and wood.

Generally, a staple gun is a sturdier and authoritative version of the office stapler.

Many of us face problems while using a staple gun and then surf the internet, searching for “how to fix a staple gun spring.”

In this article, I am going to explain to you a step by step process to the most common problems of a staple gun.

So, let’s discuss this briefly.

 

What are the Common Difficulties of a Staple Gun?

 

How To Fix A Staple Gun Spring

Before going to the staple gun problem fixation section, you need to know what are the typical difficulties of a staple gun.

Destroying spring is one of the most common difficulties of a staple gun. Except this, other difficulties are

  • To many staples.
  • Run-down spring.
  • Spring gets worn.
  • Difficult trigger.
  • Gun gets jammed.
  • Shoal stapling power.
  • Configuring staple gun.
  • Hammer gets clogged.
  • Staple gun damages.

 

Reason Behind Different Problems

For every problem, there is a reason behind it. And the reason can lead you to the solution too. Find out the reasons behind different problems and solution from below.

 

Hemmer Gets Clogged

Is your staple gun not hitting the individual staple in the correct order? Basically, it happens due to the misshape of the staple.

You need to check whether you are using the right sized staple or not in this regard. Then, it is time to open the staple gun and test the hammer by applying some pressure on the head of the stapler. There should not be any obstruction created by the hammer to slide it downward.

The good news is, the majority of the difficulties, you can solve easily using a screwdriver.

If the hammer gets clogged due to grease and dirt, use a degreaser like white vinegar to get rid of this hammer clogged problem.

Moreover, applying some lubricant will allow the staple gun to function smoothly as well as the tension will remain perfect during every fire.

 

Spring gets worn

Are you not getting enough tension from the spring of your model? If yes, then note that the model doesn’t have enough force to fire new staples consistently.

You can test the spring of your model by yourself. To do this, open the staple gun carefully first. After that, slide the spring and let the spring go. If the spring comes in contact with the bar of the staples without losing time, be sure the spring is in good condition.

And if the reaction of the spring is too weak, note it is time to purchase a new staple gun.

 

Design

There will always be some places in your job site, where you can’t take the staple gun with you due to its design. But without the presence of a staple gun, you can’t accomplish the project. Now, what can be done?

At this time, you have no other choice but to continue work without a staple gun and have to find an alternative way.

To solve this problem, you can take help from a good old hammer and a few nails. Sometimes, both of them are better performers than your upgraded staple gun.

 

Fixing a Staple Gun Problem – Step by Step Procedure

A staple gun is not a toy. But if you are trying to play a game using it with your colleague or friends, it will give you some difficulties that you may sweat your forehead to fix.

 

Step 1: Unplug the Power Source

Firstly, it is significantly essential to unplug the power source of the staple gun. Never start doing maintenance of a power tool, keeping it plugged with the power source.

 

Step 2: Open the Staple Gun

Take a screwdriver to open every part of the staple gun. It would be best if you choose a flathead screwdriver to perform this job. The staple release head is the key point for your heavy-duty staple to fill. Once the staple gun is opened, keep the staple clip aside.

 

Step 3: Take the Jammed Staple Out

Now, take needle-nosed pliers and utilize it to hold the fixed staple and stretch the fixed staple out. You should safely remove it by rotating your course and using a filled staple.

If you don’t own a set of needle-nosed pliers, take the help from a flathead screwdriver to take the jammed staple out.

 

Step 4: Fill the Staple Gun Up

Find the best staple clip you choose earlier and re-insert it at the main top. Load the staple gun using standard. Before placing the staple pieces into the staple gun, you need to make sure that the staple pieces are standard in length.

 

Step 5: Close the Staple Gun

The stick needs to be connected to the staple discharge point. If you missed out on connecting the stick at the staple discharge point correctly, the staples would not be operated at the right angle. Also, the loose staple may come to your eyes directly! So, connecting the stick to the staple discharge point correctly is considered as crucial.

 

Step 6: Start Using the Staple Gun

We are at the last stage of this task. Connect the staple gun to the power source. Either it could be using a battery or an electrical power source or compressed air. Keep the syringe securely on the recommended cover and use it continuously.

 

Quick Video Tutorial:

 

Conclusions

As you have already understood, a staple gun is easy to use, powerful and can improve your productivity undoubtedly, at the time of accomplishing a task. But one dragging point of this tool is, they get jammed too quickly. Also, you will wonder when you will learn; a staple gun is responsible for 40,000 accidents every year in the United States.

The above-discussed points will assist you in fixing the staple gun’s basic problem efficiently as well as taught you how you could avoid getting hurt from this small tool.

Best of luck while working with a staple gun!

Leave a Comment

Your email address will not be published. Required fields are marked *