A circular saw is a must-have instrument for every woodworker. So, when they tend to buy a circular saw, their first choice is; either a cordless or corded circular saw because of flexibility. Based on the user demand, we have brought the best circular saw for you.
In our review of the best circular saws, you will get a comparison chart at first. The map will give you a quick review of choosing the right circular saw. After reading the table, there will be a detailed review of each type of circular saw.
These reviews will point out the main features of every circular saw to give you a thorough guideline. Then, there will be an FAQ section, where we have tried to answer all the essential questions – you asked all the time.
So, without further delay, let’s start our top 10 best circular saws reviews.
OUR 3 TOP PICKS
|PORTER-CABLE Pce310 Circular Saw
Dewalt 7 1 4 inch Circular Saw
|Makita Tool- SP6000J1 Circular Saw
Top 10 Best Circular Saws Reviews
If you are a newbie woodworker or an experienced woodworker, you will need a handy circular saw. For that reason, we decided to share the top ten circular saw reviews. In these reviews, there will be a thorough discussion of each product. So, let’s hear the debate.
1. Makita Tool- SP6000J1 Circular Saw
The first tool from our list is Makita. In this section, we will write about the SP6000J1 model. This model has enough features for a woodworker. And they are as follows:
It has a 12-amp motor to control the 5200-rpm speed dial. As a result, the woodworker will get the best cutting experience. Including a better cutting experience, this tool has a high cutting ability. For example, it can cut 2-3/16” at 90-degree measure.
During the time of cutting wood, it creates a tremendous amount of dust. Don’t worry; it has a dust collection hole. You can connect your vacuum to the mess. Then it will send the residual in the dust.
Apart from noticing dust cleaning facilities, we saw the blade and blade guard. The module is good enough to perform different cuts, and the blade guard is also securing the edge from rust and accidents.
Since we are writing about the blade, we want to brag about the 48 teeth. This blade can conveniently cut logs in bevel, miter, rip, and straight. All the cuts we experienced were smooth.
There are also some other reasons for being a smooth cut. And the reasons are: you can adjust the depth with any large-scale, flexible plunge release options for the operator. In a nutshell, if you want a portable circular saw, then this one would be the perfect one.
- Lightweight for magnesium components.
- A built-in motor burnout resistance.
- This machine comes in a guide rail and a clamp set.
- The tool has a locking lever option to hold the blade.
- We did not like the little button in the scoring knob.
2. SKILSAW-SPT77WML Circular Saw
SKILSAW SPT77WML-01 product has also come with some user-friendly features for a woodworker. And we are straightly going to the elements without any delay. So, the features are as follows:
Skillsaw circular saw right or left emphasized mainly efficiency. That is why we saw the 5300-RPM speed in the 15-amp motor. The feature means an engineer can complete his/her cutting within a fixed time. To save you time, the manufacturer has also included a standard blade.
The blade can be cut from any position. Thus, a woodworker can shape their wood based on their expectation. To meet the user expectations, this tool has two different angle positions; the opinions are from a 0-degree to a 45-degree angle.
And this different angle means – you can cut the wood without tearing off fragments to get a flexible finishing. This sort of finishing is available for the small-scaled job because the 15-amp motors are perfect for lightweight cutting.
As well as the cutting facilities, this tool has a fantastic depth adjustment. As a woodworker, you need to adjust the depth to ensure smooth cutting. And performing a clear-cutting sometimes becomes annoying for vibration. That is why the manufacturer added a cushioned grip to endure hand fatigue.
Along with the grip facilities, the circular saw has a dual winding system. Now, what are dual windings? This technology has been used for cooling down the motor. So, the engine will cool down while it is working.
And this is why the model won a million hearts. So, we can sahttps://web.archive.org/web/20220927132611/https://www.electronics-tutorials.ws/transformer/multiple-winding-transformers.htmly that -if you are searching for a durable motor, then this could be the right choice.
- It has a 53-degree bevel capacity.
- The magnesium component has been used for durability.
- The tool has a lack of safety triggers.
3. Dewalt 7 1 4 inch Circular Saw
Dewalt 7 1 4-inch circular saw is our 3rd pick. We loved this redesigned model because of its electric brake and fabulous dust-controlling system. Dewalt has touched every essential element during the retouch session. And we are going to write about that in the next section.
This 15 amp woodworking tool can cut plywood, interior, or exterior sides smoothly. It can also trim the edge equally. For that, it has 18 teeth blade. This sort of sword can bevel up to 53 degrees.
With this sort of bevel capacity, it can adjust the bevel leveler. As a result, a woodworker will get a perfect shape cutting. For sustaining the different shape cutting in line, this tool has a 5200 RPM speed dial. This speed is enough to perform the light work.
The most important part of this tool is – it is electric efficient. So, our recommendation is; if you want a useful electronic tool, this one is good to go.
- Three years of warranty.
- Electric Brake.
- An integrated dust cleaner.
- The blade runs out faster.
4. Rockwell RK3440K Circular Saw
As a beginner, you need a Rockwell RK3440K tool to start your woodworking journey. It is not like that; we are only recommending it to the novice. Instead, this woodworking tool is also perfect for professionals.
How? The first feature we liked- is its portability. You can take it anywhere and can cut the wood even with a single hand. Next, our preference is its dust-cleaning feature. Rockwell has included a dust extraction option to clear the dust from the surface.
Including the dust cleaning feature, the tool has a laser guide. With this guide, a novice can accurately cut the wood -according to their expectations. It saves a lot of time. There is also another reason for saving your time – and it is the speed dial.
A 4-amp motor with 3500 rpm speed can cut the plywood or any wood. No matter how sturdy the object is, this speed is good enough to shape the wood. So, we can prefer this tool if you are on a tight budget.
- A small tool.
- Laser guide.
- A/C power.
- Two years of warranty.
- It needs less electric power.
- A sharp blade.
- We hardly saw the blade while cutting the boards.
5. PORTER-CABLE Pce310 Circular Saw
PORTER-CABLE Pce310 is a professional circular saw we have got at the fifth stage. This saw is a bit heavier. Don’t take this as a negative mark because a heavier saw can cut the most massive log without hassle. How? We are about to answer the question now:
Porter-cable has the 5,500-rpm speed to cut plywood, board, and wood within a short time. It is not all about speed; instead, the motor is the main reason for this fresh cut. So, the motor power is 15-amp. Sounds great for light work, right?
Not only for light work but also for heavy work, we recommend this tool. This woodworking device has some more features: it has a spindle lock to change the blade quickly. The module can cut 17/8 inches within a 45-degree bevel.
This bevel cut can extend up to 90 degrees. So, it is clear that – like a woodworker, you can cut wood in different shapes without facing any hassle.
- It has three years of warranty.
- This circular saw has a 9.5 lbs weight.
- Steel show.
- Lower and metal guard.
- It has a depth adjustment option.
- We did not find any case with the deliveries.
6. Makita 5007mg Circular Saw
Makita has a good reputation. Based on their status, we placed another Makita 5007mg model for review purposes. In this review session, you will find detailed knowledge of power, blade quality, dust extraction and other features.
So, the first thing is its power and speed. It has a 15-amp motor for a smooth cut. To perform a smooth cutting, it has a 5,800-rpm rate. This speed reduces time consumption. Next, we liked the cutting capacity.
This machine has a minimum 45-degree bevel cut, and you can extend it up to 59 degrees. With these two different ranges, a user can commercially or personally take their woodworking skill to the next level.
Thirdly, we observed the dust extraction option. This feature eats up the residual chips during the cut to ensure a clear path. With this path, you can quickly notice, “Where is your blade running?”
As a result, your accuracy becomes smooth. Such a fantastic feature, right? There are still some more things left about the tools -that is, the blade quality. The blade of this tool has a 10-degree bevel cut, plus; it has made from carbide tipped. So, this blade can handle heavy-duty work.
Apart from all other facilities, this woodworking machine has LED light for accurate cutting. There is also a base ruler for the measurement. In a nutshell, we recommend this for professional woodworkers.
- Ergonomic front handle.
- The manufacturer provides a hex wrench with the delivery.
- Amazing cutting power.
- The weight is heavy.
7. Genesis GCS445SE Circular Saw
Since the demand for the mini circular saw is rising, why don’t we share another mini circular saw review with you? Yes, we are about to tell the genesis GCS445SE circular saw features. This tool is very lightweight, and one can easily handle it with a single hand.
For that reason, the manufacturer has added a 4.0-amp motor -that can produce 3500-rpm speed. With the fastest rate, you can cut any board, plywood, or light log without hassle. This fast speed does not eat much electricity.
Instead, it is electric efficient. Since we are writing about efficiency, we better speak about the dust extractor. The dust blower eats up chips to keep clean visual insight. Thus, the woodworker can cut any object accurately.
For accuracy, blade quality is another essential thing. That is why the machine creator adjusted a carbide-tipped blade in this tool. This type of blade is best for light and hefty cuts. No matter what kind of cut do you need, it is always ready to cut with an adjustable bevel cut.
- You can easily adjust the depth.
- Amazing dust collection.
- Comfortable to use.
- It produces an excessive amount of noise.
8. DEWALT DCS575B Circular Saw
Dewalt has its brand value. And that is their biggest strength. To tighten up this strength, the manufacturer introduced a fantastic cordless circular saw. We are going to talk about the Dewalt DCS575B circular saw from now:
This battery-driven circular saw can cut up to 340 times at one charge. For that reason, you will need to put in a 60v battery. As the motor is brushless, the 60v battery can quickly drive this tool without eating extra energy.
To keep this tool energy efficient, it has an electric brake option. This brake option keeps the blade secure. Since we have mentioned the word blade, here we want to explain the power of the sword.
The blade can perform a bevel cut by following the bevel scale. As a result, each cut becomes smooth and sound. Besides the bevel cut, we have also experienced the most excellent rip, miter and straight cut from the brushless motor.
Inside this brushless motor, we experienced 5,800-rpm speed and 59-degree bevel cut facilities. So, as a cordless circular saw, this one is quite good.
- LED light for accuracy.
- Electric brake for security.
- Super easy instructional manual.
- The depth scale is hard to read.
9. Skil 5180-01 Circular Saw
We loved this Skil 5180-01 circular saw for five significant reasons. And all the bases are legit. As a woodworker, many professionals have accepted our ideas. So, here are the reasons.
A 14-amp motor has been installed in this machine. It has a 5300-rpm speed to save you time, and it can efficiently cut the object. For cutting plywood or board, it has 20 teeth, which are enough for a starter tool.
Next, we liked the fantastic control. This machine has an integrated blower technology to control the dust. Plus, it has a flexible blade-changing option. You can use the spindle lock to change new blades.
Thirdly, the bevel setting has tremendous capability. It can cut up to 51-degree by maintaining a 2 1/3 inches depth. So, based on the user perspective and our experience, we can recommend this for light use.
- A powerful motor has been installed.
- Durable and affordable.
- Perfect for DIY.
- Upper and lower guards have a bit problem.
10. Milwaukee 6390-21 Circular Saw
Our last product Milwaukee 6390-21 saw, is a Chinese brand. This brand has recently created good hype in woodworkers’ minds. The reason behind this hype is -it provides the same facilities as the mainstream brands at affordable prices.
So, what kind of facilities it has? This tool has 3.25 horsepower with a 5,800 rpm speed. With this speed, you can cut the object reasonably well. The device has a sharp blade on the right-hand side to perform a decent cut.
Secondly, the machine has a fantastic dust-blowing system. It does not bar the cutting path. As a result, woodworkers can accurately cut the wood. During the time of cutting the forest, you can adjust the bevel measure.
Thirdly and finally, we have satisfied with the soft grip handle for avoiding fatigue. As well as our team said that – the aircraft aluminium shoe is sturdy and suitable for balance. So, we can refer to this if you have an allergy to the brand.
- Sturdy and durable.
- The dust blower is fantastic.
- Every cut is smooth.
- It does not have a brake and takes enough time to stop.
Best Circular Saw Buying Guide
As the reviewer, we had to consider various factors before choosing the circular saw. Now, why have we considered many factors? Because we have a different customer base. And we believe you need to know the elements.
That is why we decided to flash the truth through a guideline. So, you will learn a definite buying guide from this section.
First, you need to decide “what type of power source you need?” there are two types of circular saw: a cordless circular saw and a corded circular saw. A cordless circular saw is perfect for remote areas. In that case, we prefer to see a portable power supply to charge the battery. On the other hand, a corded circular saw is best because it can handle heavyweight work.
It depends on the size of the blade. If a knife is large, then the depth is deep. So, we recommend checking the blade size before paying. Your cutting experience is mainly depending on blade capacity. Thus, don’t compromise.
There are four types of blades available. Number one is a steel blade; this blade is hard and has the sharpness to cut wood material. Number two is the carbide tip: this sort of edge is expensive, but the sharpness stays longer.
Number three is tie cutting blade: this type of knife has primarily used for cutting ceramic and diamond. Number four is the masonry blade: This blade is perfect for reducing abrasive objects. And we recommend you choose the steel blade or carbide-tipped blade.
Apart from the previous consideration, there are other things. If you can consider these things, then you have a high chance of winning the perfect circular saw. So, what are the items? Well, the first thing is the blade guard. Usually, a plastic blade guard is suitable for blade and user safety.
Second, electric brakes are an excellent option for stopping blade rotation. This option is electric efficient. The next consideration is beveling capacity; this option is essential for maximum bevel cuts. Thirdly, you will check the laser guide and spindle shaft options before buying.
Frequently Asked Questions (FAQs)
How to remove a circular saw blade?
It is a long story short type of instruction: you press the arbour lock and then rotate the machine blade till it engages. Then, remove the arbor nut by using a wrench. This way, the nut will lose. When the nut losses, then remove the upper blade guard and bring out the old blade. Simple!
Left-handed vs Right-handed circular saw
For left-handed individuals, a left-handed circular saw can provide significant advantages. With the blade positioned on the opposite side of the motor, left-handers can have better visibility of their cutting line and improved control over the tool’s direction. This can result in more accurate cuts and reduced chances of accidents.
On the other hand (no pun intended), right-handed individuals may find themselves more comfortable with a right-handed circular saw due to their inherent familiarity and muscle memory associated with right-hand dominance.
Additionally, many power tools are designed primarily for right-handers, making them easier to use for those accustomed to this orientation.
Best circular saw for left handed person?
We would recommend the SKILSAW-SPT77WML
How to install a circular saw blade?
The way we teach you to remove the blade. You can adjust the new edge by following the same way.
What is a worm drive circular saw?
A worm drive saw has a motor that stays in the rear drive. And this circular saw has a slower blade than a standard circular saw.
What size circular saw to cut 4×4?
A 7-1/4 inches circular saw can cut a 4×4.
What steel are circular saw blades made of?
We found various types of steel in the circular saw ingredient. But high carbon steel has mostly used at this moment.
What is the best cordless circular saw?
DEWALT has the best circular saw so far.
We are at the final stage of our best circular saws review. Our team aims to give proper direction. We believe we have been able to provide appropriate guidance through our examination.
So, based on the review, we can prefer some brands to go. And the brands are DEWALT, Makita, and Skil. These brands are perfect for durability and quality. Therefore, thanks for your patience.